Overseas Manufacturing and Clearing Goods Through Customs

When importing into a country, there are a number of terms, regulations and procedures an importer should be familiar with. The following is a guide of different issues to be aware of when importing.

For first time importers, it is highly advisable to pay a customs broker to enter and clear goods through customs. Customs brokers are licensed by the countries in which they operate, and they act on behalf of the importer to file the necessary documents for products to enter a country at the port-of-entry. Depending on their relationship with their client, they may also pay customs duties and other importing expenses on their client's behalf. Finally, they advise importers about issues of which they may need to be aware such as country or origin marks and other issues importers need to be aware of.

When choosing a customs broker, the importer should first make sure they can enter goods at the arrival port. In the US, customs brokers are licensed by the US Customs and Border Protection Service.

Prior to placing an order with a manufacturer, the relevant nation's customs agency and the importer's customs broker should be consulted to avoid possible problems such as the following:

  • Any legal issues that may exist with the product in the country of import.
  • Finding out after the product arrives at port that the it is subject to import quotas.
  • Possible health, safety or other regulations which apply to the product to be imported.

One easy to avoid, but common problem encountered when importing is the failure to mark the product in compliance with country of origin regulations. To avoid this, contact the relevant customs agency of the nation where the merchandise will be imported to ensure the goods are in compliance. For example, custom laws in the US require each imported good be marked with the English name of the country of origin (eg China) as reasonably, indelibly, and permanently as the nature of the article permits. Furthermore, this marking must be visible to the ultimate purchaser of the product.

The tariff rate levied by customs must be paid before the importer can take possession of the goods. While tariff rates in countries like the US average around 5% for most products, they can be significantly higher for some goods, particularly those with higher labor content. Therefore, it is important to know the rate before product arrives at port.

Before the goods are shipped, ensure the packing regulations for the destination country have been adhered. For example, every box, bale or case may need to be numbered with the exact quantity in each.

Other regulations include the type of pallets that can be used.

Problems with customs clearance often center around paperwork. Different goods often require different types of documentation, but the three major types of documentation the shipper must prepare include the following:

1. A bill of lading: This document, issued by the carrier or shipper, is basically a receipt of the goods acknowledging that they have been received on the vessel for shipment. This document indicates the particular vessel on which the goods have been placed, the destination of the goods, and the terms for transporting the goods to their final destination.

2. A commercial invoice: This is used as a customs declaration by the entity that is exporting an item across international borders. This document is required by customs to determine the value of the goods to assess duties and taxes, and goods must be invoiced in a systematic manner.

3. Packing list: This document is an itemized detail of the merchandise in a particular shipment. A copy is usually attached to the outside of the shipping container or inside the container itself so the merchandise may be counted by the person opening it.

It is crucial to make sure these documents, and any others that may be needed for a particular shipment, are carefully completed and reviewed before the goods arrive.

To avoid excess storage fees, arrange for a freight forwarder or some other type of transporter to ship the goods to their final destination as soon as they have cleared customs.

Being aware of these points, as well working closely with customs and a customs broker, will make the importing process smoother and will reduce the possibility of unnecessary difficulty or expense.

Powerful Domain Names – Announcing 6 Marvelous Ways to Impact Your Domain Names

Your domain name is an integral part of your ebusiness and plays crucial role in your marketing campaigns. It is through this name that your potential customers will remember you and the product you promote. That is why; it is very important that you give your website a name that is easy to remember so you can easily generate traffic and increase your sales potential.

1. Short vs. long. Typically, short website names promote easy recall. However, if your products and business are well-known in your industry, you can use them on your domain name regardless of how many characters they may require.

2. Insert relevant keywords. If you are selling iPods, you better include iPod on your domain name to make it search-engine friendly. Then, you can add adjectives which can best describe your products or your services.

3. Pick the best language. If you are targeting people who do not use English as their primary language, you can create a domain name using their local dialect. This will make your website name more appealing and targeted to your potential clients.

4. Never use trademarked names. This can result to online disputes or worst, legal actions. Check the words that you would like to use first and verify if they are already taken to avoid such dilemma.

5. Special characters: to use or not to use. I'd say, stay away from them as much as possible. Online users do engage using special characters when they search for website online and generally prefer typing alphanumeric symbols.

6. Solicit feedback. Ask for the opinions of domain name experts and possibly people from your target market before registering your desired website name. What may sound profitable for you may not even be appealing to your potential clients.

Saving Money On Gasoline For Your Automobile

The gas that we fill our tanks with every week adds up to be quite an expensive bill over the months and years. Thirty dollars a week in gas adds up to over $1500 a year.

That’s $1500 additional dollars needed just top drive something you already own (or making payments on).

Small changes in your driving habits can save you hundreds every year. It’s really not as difficult to increase your fuel mileage as you might think.

WANT TO KNOW HOW MUCH YOU’RE SAVING?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Keep track of your mileage for one week (7 days) BEFORE you start implementing these gas saving tips. The following week, start practicing these tips and keep track of the mileage for another seven days.

Nothing elaborate. Use the re-setable odometer found in most vehicles or simply use a post-it note in your car. You might find yourself saving $5-$10 a week which works out to $260-$520 annually!

TEN GAS SAVING TIPS

~~~~~~~~~~~~~~~~~~~

Here are ten short gas saving tips that you can start using today. Most of these tips can be immediately put into use and cost absolutely nothing! What can be better than saving money for FREE?

- Check Tires Regularly

Keep tires properly inflated to avoid premature wear and mileage loss. Under inflated tires can waste 5%-10% more fuel than needed.

- Maintain Car Momentum

If possible, scan the road ahead to anticipate when slowing will occur. Maintaining even a ‘crawl’ will save you gallons as opposed to constantly stopping and going.

- Stop ‘n Go Traffic

Using the car air conditioning unit during heavy traffic can really ‘burn’ up gas quickly. If it’s bearable, try to keep the windows or sunroof open for fresh air.

- Remove Unnecessary Weight

If possible, remove car racks and any items of considerable weight. You’d be surprised at what an extra 50-100lbs can do to your gasoline consumption rate.

- Keep Filters/Converters Clean

This can save you and your engine a lot of extra work. Most filters cost between $3-$15 and can be replaced without much work – especially the air filter.

- Higher Octane Gas

Do not benefit most cars. Only use the higher octane if your engine is starting to ‘ping’ (engine knock)

- Cruise Control

Maintain an exact speed allowing for better fuel consumption. Effective on open highways.

- On Highways

If possible, try to keep windows and sunroofs closed especially at high speeds. Use the built in ventilation system for fresh air for optimum aerodynamics.

- PickUp Owners

Consider a ‘soft-net’ type gate replacement to eliminate the “drag chute” effect. Extremely effective on freeways/highways.

- Purchase Gas On Indian Reservations

NO taxes on gas on the reserves. It might pay to fill up the next time you are near an Indian Reservation.

CONCLUSION

~~~~~~~~~~~~

Simple yet extremely effective, these tips can help you start saving money immediately off your gas bill.

Regardless of which gas saving tips you are able to use from this article, keep in mind that SAFETY is the most important concern on the road. NEVER jeopardize the safety of you or the other drivers around you at any time. . . period.

Impact of Technology on Business

Together with the advancement of science and technology, technological innovations grew along with it, resulting to the emergence of new equipment and gadgets. No matter how big or small your company is, technology brings both intangible and tangible benefits to become cost efficient and to meet the growing demands and needs of customers. Technological innovations affect corporate efficiency, culture and relationship among employees, clients, suppliers and customers. The type and quality of technology used affect the security of confidential business information.

Due to the burden brought by administrative tasks, like inventory, bookkeeping and records keeping, both big and small companies rely on computers to do their administrative works. The birth of Internet and online social networking sites tremendously decreased the costs of business operations. It also makes it easier for companies to use the Six Sigma management methodologies. Some firms shifted to outsourcing instead of hiring their own personnel due to the low costs associated with it. Because of the huge impact of technological innovations to companies, it is impossible for them to live with it.

Commonly used high technology equipment:

  • Computers
  • Photocopier
  • Telephone
  • Computer printer
  • Internet
  • Paper shredder
  • Multimedia projector
  • Touch screen monitors
  • Computer mouse
  • Laptop computers

Advantages of Technology to Business:

  • Customer Relations. Technology affects the way companies communicate and establish relations with their clients. In a fast moving and business environment, it is vital for them to interact with clients regularly and quickly to gain their trust and to obtain customer loyalty. With the use of Internet and online social networks, firms interact with consumers and answer all their queries about the product. Establishing effective communication with customers not only creates rapport with them, but it also creates strong public image. It allows business enterprises to reduce and to cut carbon dioxide emissions.
  • Business Operations. With the use of technological innovations, business owners and entrepreneur understand their cash flow better, how to manage their storage costs well and enables you to save time and money.
  • Corporate Culture. Technology lets employees communicate and interact with other employees in other countries. It establishes clique and prevents social tensions from arising.
  • Security. Modern security equipment enables companies to protect their financial data, confidential business information and decisions.
  • Research Opportunities. It provides a venue to conduct studies to keep themselves ahead of competitors. It allows companies to virtually travel into unknown markets.
  • Corporate Reports. With technology, business enterprises communicate effectively with their branch offices to deliver quality financial and operational reports.
  • Industrial Productivity. Through the use of business software programs or software packages, it automated traditional manufacturing process, reduces labor costs and enhances manufacturing productivity. It enables companies to increase efficiency and production output.
  • Business mobility. Technological innovations improved companies’ sales, services, shorted lead time on receiving and delivering goods and services. Enables them to penetrate multiple markets at least costs.
  • Research capacity. It enables them to conduct studies on various companies to gain knowledge on the new trends in the market and way on avoiding them.